Ethernet/PoE protector in a waterproof aluminium enclosure

DEHNpatch outdoor, the new complete unit comprising surge protection and an outdoor enclosure protects your surveillance cameras, PoE++/4PPoE and other GBit Ethernet applications with a lightning current discharge capacity of in total 4 kA (10/350 µs).

Optimum protection for use in outdoor or industrial applications

No more messing about at the top of a mast! DEHNpatch comes pre-installed in the IP66 enclosure - mounting it is extremely simple - bend the seal open, neatly insert the cable - finished.

You use pre-wired cables - the screws are captivated in the lid so they can't fall out ... and installation is as quick as a flash.

Fields of application for DEHNpatch outdoor

IP / PTZ camera systems
Wireless Access Points (WAP) / Point to Point (PTP/PTMP) communications systems
Remote Computer Terminals (RCT)
Door access / locking systems, intercoms, emergency phone / call boxes
Digital LCD signage displays
Industrial networking and other automation systems

Flexible mounting

Montage - Leitung einstecken — Cable inserted neatly

Montage - Schrauben gesichert — Screws are captivated to prevent loss

Montage - flexibel montiert — Flexibly mounted

You are also flexible in terms of mounting. You decide whether to mount it on a pole or a wall, horizontally or vertically – all no problem at all thanks to the practical, universal mounting bracket.

Installation instructions

In a nutshell: Your advantages with DEHNpatch

No EB conductor needed
Equipotential bonding via the enclosure. If fastened to an earthed metal pole, no additional EB conductor is needed.
Screws fixed in place
The enclosure screws are secured against falling out – especially advantageous when mounting.
Protection against moisture
The integrated pressure equalising membrane prevents condensation in the enclosure.
High degree of protection
The sealing prevents moisture from penetrating the enclosure (IP66)
Cover secured
The two halves of the enclosure are securely linked by the EB conductor – this makes mounting easier because there are no loose parts to fall down.
Strain relief
The pre-assembled cable is precisely sheathed. The plug stays securely in the socket even if there is strain on the cable.
Universal mounting bracket
Can be mounted on a pole or a wall (horizontally or vertically)
Strain relief
The pre-assembled cable is precisely sheathed. The plug stays securely in the socket even if there is tension on the cable.
Only ONE screwdriver needed
Very practical: all screws can be tightened with a PH1 screwdriver. This saves mounting time.

Online catalogue

DEHNpatch outdoor M CAT 6

Surge arresters of the DEHNpatch family fulfil various requirements for a universal application for Ethernet, Industrial Ethernet, Power over Ethernet (IEEE 802.3 compliant up to PoE++ / 4PPoE) as well as general applications in structured cablings up to the Gbit range. Due to the different product designs the SPDs are suitable for indoor and outdoor installation in different environmental conditions.